I have the following spare parts from a 1959 T-Bird:

Temp control switch (controls the compressor clutch)

A/C fiberglass housing
Sight Glass
2 condensor hoses
2 evaporator hoses
1 finned Your compressor
Evaporator with R12 expansion valve

I am interested in your 430 A/C parts. PLease drop me a note with your email or telephone if you still have same. Regards 430Bird

I'll trade for parts. I need side glass with the frames. I prefer tinted but clear will work.

I need a new or rebuilt power steering control valve. I need to rebuild my front end and need new front end parts. I want an original 5-blade fan and spacer for my 430 w/AC. I don't want a look alike or reproduction. It must be a correct 5-blade for a 1959 T-Bird AC car

I have a 1958 383 Mercury block, heads, crank, pistons w/rods, intake flywheel, many of the parts work on a 430 but I sold the cam.

I have a spare fresh rebuilt 2853s Carter AFB and a reground 430 58-60 camshaft still in the box. The core charge alone on the cam is $200.00 and you probably know you can't buy one without a core or you have to get your cam reground.

I want $150.00 for the camshaft with a good core or $350.00 outright. I want $400 outright for the rebuilt carb.

I have a pair of reupolstered door door panels.

Cash or trade. I also have extra 58-59-60 A/C parts. Evaporator w/housing and R12 expansion valve, 3 of the 4 needed lines w/sightglass, spare radiator, the temp control relay that switches the compressor clutch. I have an original finned York aluminum compressor, a 430 compressor mount (off a Lincoln) I think I have a compressor clutch too. I have a rebuilt Tecumseh cast iron 1959 T-Bird A/C compressor, spare rebuilt 430 dual groove pulley generator, spare front bumper spare rear bumper with a hole cut in it to mount a trailer light plug and even a spare radio and more. I have a drier and condensor off a 62 T-Bird that will fit a squarebird.

Email: dXaXvid@rhyXner.com and remove all the X's