I have a rebuilt 2853S Carter AFB for a 1959 Thunderbird with a 430 engine. I would sell it outright but would rather trade it for parts for my car.

If you are interested in any of the parts I have posted, please email me or leave a contact method here.

Greetings. I have a very early manufactured 1960 430 TBird for which I need a carburater and a camshaft. If you still have either parts, I would be interested in talking to you. I also have quite a bit of 4 passenger TBird parts, as I have 10 cars of these years. Please call me if you have an interest in sale or trade. Regards, Larry

Oops, my telephone number to reach me about the 430 camshaft or carburater is 206-406-9172

I tried your number but didn't get an answer. I have both the carb and the cam for a 430. Email me direct at dXaXvid@rhyXner.com and remove all the ''X'' added to prevent email address.

I prefer email for communications anyway.

I'll trade for parts. I need side glass with the frames. I prefer tinted but clear will work.

I need a new or rebuilt power steering control valve. I need to rebuild my front end and need new front end parts. I want an original 5-blade fan and spacer for my 430 w/AC. I don't want a look alike or reproduction. It must be a correct 5-blade for a 1959 T-Bird AC car

I have a 1958 383 Mercury block, heads, crank, pistons w/rods, intake flywheel, many of the parts work on a 430 but I sold the cam.

I have a spare fresh rebuilt 2853s Carter AFB and a reground 430 58-60 camshaft still in the box. The core charge alone on the cam is $200.00 and you probably know you can't buy one without a core or you have to get your cam reground.

I want $150.00 for the camshaft with a good core or $350.00 outright. I want $400 outright for the rebuilt carb.

I have a pair of reupolstered door door panels.

Cash or trade. I also have extra 58-59-60 A/C parts. Evaporator w/housing and R12 expansion valve, 3 of the 4 needed lines w/sightglass, spare radiator, the temp control relay that switches the compressor clutch. I have an original finned York aluminum compressor, a 430 compressor mount (off a Lincoln) I think I have a compressor clutch too. I have a rebuilt Tecumseh cast iron 1959 T-Bird A/C compressor, spare rebuilt 430 dual groove pulley generator, spare front bumper spare rear bumper with a hole cut in it to mount a trailer light plug and even a spare radio and more. I have a drier and condensor off a 62 T-Bird that will fit a squarebird.

Email: dXaXvid@rhyXner.com and remove all the X's

Hello im looking for a 2853S carter carb for my 59 t-bird could you help??? let me know thanks Tom

quote:

Originally posted by Tom Gliebe:
Hello im looking for a 2853S carter carb for my 59 t-bird could you help??? let me know thanks Tom

Try Kanter Auto Productc in NJ, kanter,com. Recently ordered a Carter 2853 for around $400 with shipping, including a core charge as mine is long since gone. 2-4 weeks delivery as they have the core and rebuild once ordered. Their books call for a Holley as OEM, once past that discussion they are very helpful. Good luck, Ken